2025 Timpte Roughneck Heaped 9" 96" Wide AG 750 ft3
- Year 2025
- Make Timpte
- Model Roughneck Heaped 9" 96" Wide AG
2025 Timpte Roughneck Heaped 9" 96" Wide AG 750 ft3
2025 Timpte Roughneck Heaped 9" 96" Wide AG 750 ft3
Since 1884, Timpte has innovated and driven the logistics industry forward. Supporting work across frac sand mines and improving last mile logistics, Timpte trailers consistently perform in the harshest environments. Delivering higher payload, greater reliability, and faster unloading than legacy trailers, we’ll help you maximize productivity and minimize demurrage day in and day out.
Features may include:- Side Panels
- Air Ride Dump Valve & Oil Filled Pressure Gauge
- Enclosed Upper Coupler Assembly
- EZ FlowXR
- Knock Rails
- Lights & Electrical
- Hydraulic Top Hatch and Enclosed Cover
Dimensions
Length
39’ 0” | Traps openings: 26” | Mudflaps ½” Black heavy-duty rubber: 30"
Height
66”
Width
96” | Traps openings: 24” | Mudflaps ½” Black heavy-duty rubber: 24"
Kingpin Setting
20”- Single I-beam Steel coupler.
Dimensions
Interior Lining-.048” aluminum. 45 degree slope at front and rear | 39 ft. Long 96 inches Wide | Traps: Single standard AG door 24”L x 26”W opening supported by a robust structural trap frame. The trap plate is 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. Hopper clearance 25”.
Capacities
Payload Capacity
27.5 ton estimated payload based upon 8,600 lb trailer, 16,100 lb tandem tractor and 80k GVW (Interstate System) | 30.5 ton estimated payload based upon 8,600 lb trailer, 14,100 lb tandem tractor and 84k GVW (Texas w/ permit)
Volume
720 cubic feet “usable sand volume” 850 cubic feet heaped | Based upon 100 lbs/cubic feet 70/40 mesh dry sand 86 lbs / cubic feet 100 mesh dry sand | Dry loose sand angle of repose: approximately 33 degrees | Consideration for future “trade-in” units capable of being re-fitted with vertical extensions and conventional tarp. | To accommodate use back into the grain market with approximately 1,100 cubic feet capacity
Weights
Weight
8,600 – 9,500 lb max
Chassis
Chassis
Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion
Electric
Electrical
All weather-pack automotive style connections, sealed to prevent corrosion.
Lights and Safety
Lighting
Side Lamps – Includes 1 rows of 3 – ¾” diameter LED bullet marker lamps each side; (3) amber, (2) red and (1) amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾” diameter LED bullet marker lamps. | Standard High mounted Rear Frame Lamps – (5) red ¾” diameter LED bullet marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode LED lamps – all grommet mounted.
Suspension
Suspension
23,000 lb. rated air ride suspension, 17” ride height 71 ½” track. Suspension subframe: Steel
Features
Features
Support Legs: Square legs, with roadside fixed crank handle, low-profile 10" square cushion foot shoe, 50,000 lbs. lift capacity. Located 94” from Kingpin | Hoppers: Single Hopper Formed .125 aluminum panels with side slope angle of 35.8 degrees, center and end panels with slope angle of 33 degrees, Ag tub design. Knockrail in upper and lower position on all sides of the hopper with wrap around structural corner connections. Front and Rear End Slope Panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. Divider Panel – heavy duty panel that supports side walls, has deflector on top to disperse loading from directly impacting trap door and extends down to frame rail, .080 aluminum supported by bulkhead crossmembers. | Tarp/Cover: Rigid or semi-rigid composite cover or similar cover fixed in place – with 32’ wide, 10’ long sliding opening Designed in a manner that this trailer cover system could be replace with standard style tarp system in future | Cover Opener: Keypad operation on both sides of trailer for hydraulic hatch | Coatings: Black protective metal coating on all steel parts.
Construction Material
Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Nose Panels: Smooth pre-painted white .063” aluminum.
Hydraulics
Hydraulic Type
EZ Flow Hydraulic Trap with operator keypad on both sides of trailer
Wheels & Tires
Hub Type
Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
Wheels
Eight (8) 22.5 Aluminum Wheels
Tires, Rear Specification
Eight (8) R123 R22.5 radials.
Brakes
Brake System Type
16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121 – 4 sensor, 2 modulator anti-lock braking system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5