2025 Timpte Lead & Pup Water Level 102" Wide AG 1705 ft3
- Year 2025
- Make Timpte
- Model Lead & Pup Water Level 102" Wide AG
2025 Timpte Lead & Pup Water Level 102" Wide AG 1705 ft3
2025 Timpte Lead & Pup Water Level 102" Wide AG 1705 ft3
Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.
Features may include:- Aluminum Tarp Bows
- Side Panels
- Air Ride Dump Valve & Oil Filled Pressure Gauge
- Upper Coupler Assembly
- Trap System
- Lights & Electrical
- Access System
- Rear Corner Frame Posts
- Electric Tarp System: Thunder7000
- Tarp: ThunderArmor
- Tarp Bows
Dimensions
Length
40’ 0” | Traps openings: 26” | Mudflaps Black heavy-duty rubber: 30"
Height
78”
Width
Traps openings: 24” (102” wide trailers Add 6” to trap opening width.) | Mudflaps Black heavy-duty rubber: 24"
Kingpin Setting
20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
Dimensions
Support Legs Located 94” from Kingpin. | Hopper clearance 25”. | Tarp Bows: Eight (8) – 9” rise galvanized steel arch type on 42’ trailers, seven (7) on the 36’, 38’ & 40’ trailers.
Capacities
Cargo Capacity
Support Legs: 50,000 lbs. lift capacity
Electric
Electrical
Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
Lights and Safety
Lighting
Side Lamps – Includes 2 rows of 3 – ¾” diameter LED bullet style marker lamps each side; (3) amber, (2) red and (1) amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾” diameter LED bullet style marker lamps. | Standard High mounted Rear Frame Lamps – (5) red ¾” diameter LED bullet style marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode LED lamps – all grommet mounted.
Suspension
Suspension
23,000 lb. rated air ride suspension, 17” ride height 71 ½” or 77 ½” track. Suspension subframe long beams and crosstubes are rectangular structural steel tubing. 49” axle spacing.
Wheels & Tires
Wheels
Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
Hub Type
Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
Tires, Rear Specification
Eight (8) 11R24.5 radials.
Brakes
Brake System Type
16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121 – 4 sensor, 2 modulator anti-lock braking system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
Features
Features
Access System: Aluminum ladders are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. Grab handle mounted above the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10" square cushion foot shoe, “No Lube” feature | Tarp: Thunder Armor 18 oz. roll tarp system. Three molded black plastic sidewall protectors. | Tarp Opener: Thunder 7000 electric tarp opener system with One Touch control and RF remote. | Coatings: Black protective metal coating on all steel parts.
Construction Material
Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Formed .125 aluminum panels with side slope angle of 35.8 degrees, center and end panels with slope angle of 33 degrees, Ag tub design. Single knockrail in upper position on either side of the hopper. | Front and Rear End slope panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.