2025 Timpte TA Water Level 102" Wide Split 2,049 ft3
- Year 2025
- Make Timpte
- Model TA Water Level 102" Wide Split
2025 Timpte TA Water Level 102" Wide Split 2,049 ft3
2025 Timpte TA Water Level 102" Wide Split 2,049 ft3
Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.
Features may include:- Aluminum Tarp Bows
- Side Panels
- Air Ride Dump Valve & Oil Filled Pressure Gauge
- Upper Coupler Assembly
- Trap System
- Lights & Electrical
- Access System
- Rear Corner Frame Posts
- Electric Tarp System: Thunder7000
- Tarp: ThunderArmor
- Tarp Bows
Dimensions
Length
42’ 2" | Traps openings: 26” | Mudflaps Black heavy-duty rubber: 30"
Height
84”
Width
Traps openings: 24” | Mudflaps Black heavy-duty rubber: 24"
Kingpin Setting
20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
Dimensions
Support Legs Located 94” from Kingpin. | Hopper clearance 25”.
Capacities
Cargo Capacity
Support Legs: 50,000 lbs. lift
Electric
Electrical
Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground. | Conspicuity Tape: Red and white reflective tape mounted in conspicuity track of lower rail and full width across rear of trailer. White reflective tape mounted on top corners of rear frame. (All lamps and wiring comply with FMVSS 108)
Lights and Safety
Lighting
Side Lamps – Includes 2 rows of 3 – ¾” diameter LED bullet style marker lamps each side; (3) amber, (2) red and (1) amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾” diameter LED bullet style marker lamps. | Standard High mounted Rear Frame Lamps – (5) red ¾” diameter LED bullet style marker lamps on rear header. | Rear Tail Lamps- (6)-4” diameter, 6 diode LED lamps – all grommet mounted.
Suspension
Suspension
23,000 lb. rated air ride suspension, 17” ride height 71 ½” or 77 ½” track. Suspension subframe long beams and crosstubes are rectangular structural steel tubing. 49” axle spacing.
Wheels & Tires
Wheels
Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
Hub Type
Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
Tires, Rear Specification
Eight (8) 11R24.5 radials.
Brakes
Brake System Type
16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121 – 4 sensor, 2 modulator anti-lock braking system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
Features
Features
Access System: Aluminum ladders are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. Grab handle mounted above the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10? square cushion foot shoe, “No Lube” feature | Single knockrail in upper position on either side of the hopper.| Trap Operators: Each trap is opened and closed by a manually operated 1” diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank. There are trap locks at each crankshaft. The double rack and pinion gears drive at both sides of each trap plate. | Tarp: Thunder Armor 18 oz. one-piece tarp | Tarp Opener: Thunder 7000 electric tarp opener system with One Touch control and RF remote. | Tarp Bows: Eight (8) – 9” rise galvanized steel arch type on 42’ trailers, seven (7) on the 36’, 38’ & 40’ trailers. | Coatings: Black protective metal coating on all steel parts.
Construction Material
Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Formed .125 aluminum panels with side slope angle of 35.8 degrees, center and end panels with slope angle of 33 degrees, Ag tub design. | Front and Rear End Slope Panels – .080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.