2025 Timpte Spread Water Level 102" Wide Split 2,226 ft3

Information

2025 Timpte Spread Water Level 102" Wide Split 2,226 ft3

Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.

Features may include:
  • Aluminum Tarp Bows
  • Side Panels
  • Air Ride Dump Valve & Oil Filled Pressure Gauge
  • Upper Coupler Assembly
  • Trap System
  • Lights & Electrical
  • Access System
  • Rear Corner Frame Posts
  • Electric Tarp System: Thunder7000
  • Tarp: ThunderArmor
  • Tarp Bows

Photos

Highlights

  • Delphos, Ohio
  • 2025
  • Timpte
  • Spread Water Level 102" Wide Split 2,226 ft3
  • Available
  • Traps openings: 26” surrounded by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
  • 84”

Specifications

  • 2025
  • Timpte
  • Spread Water Level 102" Wide Split
  • 2,226 ft3
  • Hopper / Grain
  • Support Legs Located 98” from Kingpin. | Hopper clearance 25”. | Tarp Bows Nine (9) – 9” rise galvanized steel arch type on on 48’ & 50’ trailers.
  • 50’ 0” | Traps openings: 54” surrounded by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
  • 84”
  • Traps openings: 26” surrounded by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
  • 20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
  • Support Legs: 50,000 lbs. lift capacity
  • Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
  • Side Lamps – Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D, (1) amber L.E.D. mid turn/marker lamp. | Nose Lamps – (2) High mounted amber L.E.D. lamps. | Standard High mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode L.E.D. lamps, flange mounted.
  • 23,000 lbs rated air ride suspension, 17” ride height, 71-1/2” or 77-1/2” track, with 28-spline camshafts. | Suspension subframe long beams are 4” x 8” x ¼” rectangular structural steel tubing and the crosstubes are 4” x 8” and 6” x 8” structural steel tubing.. 10’2” axle spacing on the 48’
  • Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
  • Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
  • Eight (8) 11R24.5 radials.
  • 16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121. 4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
  • Access System: Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10? square cushion foot shoe, “No Lube” feature | Mudflaps: 3/8” Black heavy-duty rubber 24”W x 30”L. | Tarp: 18 oz. locking roll tarp with rear mounted crank. Three molded black plastic sidewall protectors | Tarp Opener: Thunder 7000 electric tarp opener system with One Touch control and RF remote. | Coatings: Black protective metal coating on all steel parts.
  • Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Side panels of .080” aluminum with side slope angle of 43.5 degrees. Center and end panels of .100 aluminum with slope angle of 33 degrees. Riveted split tub design. | Front and Rear End slope panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.