2022 Timpte Lead & Pup 36’ 0” L x 66” H

Information

2022 Timpte Lead & Pup 36’ 0” L x 66” H

Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.

Features may include:
  • Side Panels
  • Air Ride Dump Valve & Oil Filled Pressure Gauge
  • Upper Coupler Assembly
  • Trap System
  • All weather-pack automotive style connections sealed to prevent corrosion.
  • 2 rows of 3 LED bullet lights with center mid-ship turn signal
  • (2) Front high-mount LED bullet lights
  • (5) Rear high-mount marker LED bullet lights
  • (6) 4” diameter stop/turn signal LED bullet lights
  • Rear Corner Frame Posts
  • ELECTRIC TARP SYSTEM: THUNDER7000
  • Tarp: ThunderArmor
  • Tarp Bows

Photos

Highlights

  • Delphos, Ohio
  • 2022
  • Timpte
  • Lead & Pup 36’ 0” L x 66” H
  • Available
  • Traps openings: 24” (102” wide trailers Add 6” to trap opening width.)
  • 66”

Specifications

  • 2022
  • Timpte
  • Lead & Pup
  • 36’ 0” L x 66” H
  • Hopper / Grain
  • Support Legs Located 94” from Kingpin. | Hopper clearance 25”.
  • 20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
  • Traps openings: 24” (102” wide trailers Add 6” to trap opening width.)
  • 36’ 0” | Traps openings: 26”
  • 66”
  • Heaped 9" AG 96" width: 1327 FT3 | Heaped 9" AG 102" width: 1420 FT3 | Water Level AG 96" width: 1172 FT3 | Water Level AG 102" width: 1254 FT3 | Support Legs: 50,000 lbs. lift capacity
  • Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
  • Side Lamps – Includes 2 rows of 3 – ¾” diameter LED bullet style marker lamps each side; (3) amber, (2) red and (1) amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾” diameter LED bullet style marker lamps. | Standard High mounted Rear Frame Lamps – (5) red ¾” diameter LED bullet style marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode LED lamps – all grommet mounted.
  • 23,000 lb. rated air ride suspension, 17” ride height 71 ½” or 77 ½” track. | Suspension subframe long beams and crosstubes are rectangular structural steel tubing. 49” axle spacing.
  • Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
  • Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
  • Eight (8) 11R24.5 radials
  • 16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121. 4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
  • Access System: Aluminum ladders are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. Grab handle mounted above the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10" square cushion foot shoe, “No Lube” feature | Mudflaps: Black heavy-duty rubber 24”W x 30”L | Tarp: Thunder Armor 18 oz. roll tarp system. Three molded black plastic sidewall protectors. | Tarp Opener: Thunder 7000 electric tarp opener system with One Touch control and RF remote. | Coatings: Black protective metal coating on all steel parts.
  • Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Formed .125 aluminum panels with side slope angle of 35.8 degrees, center and end panels with slope angle of 33 degrees, Ag tub design. Single knockrail in upper position on either side of the hopper. | Front and Rear End slope panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.